Mini Cutting Torch System

Now - The fastest, easiest and cheapest method available today.

The Caldo Mini-Torch is a patented design. The torch operates on oxygen alone. The inner components burn a little faster than the outer components, creating a shroud effect, yielding a much hotter, directed burn.

The Caldo Mini-Torch's unique technology enables it to cut, burn, melt or vaporize virtually all metallic, non-metallic and composite materials, for almost half the price of other exothermic cutting systems.

Relatively low temperatures are experienced in the parent metal when using the Caldo Mini-Torch. With the Caldo Mini-Torch you don't experience warpage, loss of tensile strength or metal fatigue. And, because the torch operates without electrical continuity, repairs can be made without raising burrs on main frames and final drives..

1. Gouge, pierce and cut any type of material including T1 and T2 Steel. 2. Superior torch control. 3. 25% more work than competitive makes. 4. 25% longer-lasting rods. 5. Less oxygen use than similar troches. 6. Pug Tube or Battery Ignition. 7. No trace metals or carbon build-up. 8. Interchangeable with other cutting systems.

It's faster and less expensive than carbon arc - which requires 400 amps and compressed air - and it will even handle cast iron, stainless steel, high alumina refractory, slag and concrete.

With our Pug Tube Ignitor you even eliminate the need of a 12-volt battery. All you need is oxygen and a match
1. Simply light the Pug Tube with a match. 2. Pug Tube will then smoulder (reusable). 3. Insert rod, supply oxygen and you have ignition!

Flexibilty:-

Five different rod sizes avaiable with the Caldo Mini Cutting Torch:
			3/16" x 21-3/4" used for: Piercing of smaller bolts 1/4" to 3/4" diameter Piercing of small rivets Piercing transmission bolts
			1/4" x 21-3/4" used for: The finishing piercing on track pins Piercing small rusted bolts removing frozen bushings rough cutting
			3/8" x 18" used for: Starting the pierce of a track pin all gouging
			3/8" x 36" used for: Starting the pierce of track pins longer than 7" All heavy gouging and piercing heavy rough cutting
			3/8" x 48" used for: Hard-to-reach areas Eliminates frequent changing of rods.
Rods can be bent to reach hard-to-get-at areas, eliminating the need to lie or stand directly under workplace.

.

Back to Main Menu.

[Hire Centre] [Industrial Services] [Gas Monitoring]
[Mobile Breathing Air] [Caldo Cutting Equipment] [Training]
[About us] [Contact us] [Home]

Contact us @

All Trade marks and Trade Name Recognised