Flightpath 1/72 scale Post War USAF, NATO & Russian Subjects Products Page

Military Lockheed Constellation [EC-121] Engine Set				Ł14.90
Resin/cast replacement engines for use with the Heller Connie kit in military guise. These engines are the ex-DB items, which have been unavailable for some time until our recent purchase of the masters.

Boeing RB-47H Conversion Set				Ł14.90
This large set converts the Hasegawa B.47E into the RB version. Included is a nose unit, enlarged bomb bay, rear radome, wing tip antennae, fuselage radome, and several other items to make this interesting variant.
*For the Italeri C.130 kits - no less than eight Flightpath detail and conversion sets that each use these kits as a basis.*

C-130 Hercules Detail Set				Ł14.90
For the Italeri kits - this large fret gives rear cargo hold and ramp details, cockpit entry steps, cockpit, airframe and undercarriage details, wheel chocks, and all wing flap detail. A truly comprehensive set of finely-etched components that can be used in conjunction with any of the other C-130 conversion sets.


C-130 Allison T56-A-15 Engine Set				Ł9.90
This pack provides four resin units of this engine, as fitted to many later C.130s

C-130-3 Fuselage Extension Plugs				Ł12.90
A pair of forward and aft resin units for the Italeri kit - to convert your model to an RAF C.3P or any other Dash-30 machine now in service with the USAF or others.

C-130 Hercules In-flight Refuelling Pods				Ł10.90
These are the large Hose Drum Units carried on HC-130P & KC-130H variants + some RAF C.130s - set of two units in resin.

C-130E-1/HC-130H/HC-130P Conversion Set				Ł9.90
This versatile set includes a replacement nose with detailed Fulton STAR recovery gear, together with a vacuum moulded AN/ARD-17 Aerial Tracker Radome for the HC-130H and HC-130P variants. Our C.130 Long Engines should be used in conjunction with this set if modelling either the HC-130H or P versions. The HC-130P also requires the In-flight Refuelling Pods [see above]. If modelling the C.130E-1 version from this set - the spare tracker radome will prove a valuable accessory for other conversions you may make - e.g. - HC-130B, or HC-130N [again, using our In-flight Refuelling Pod and Long Engines Sets] - [at this price why not make all the variants!]


LC-130F Hercules Conversion Set				Ł14.90
This pack enables the construction of one of the colourful Antarctic supply aircraft, as operated by the US Navy. The set includes a full set of skis, under-nose fairing, and extended tail cone for the crash position indicator.

MC-130E Combat Talon I Conversion Set				Ł12.90
This set includes a replacement nose with detailed Fulton STAR recovery gear, a new extended RWR rear fuselage fitting, a complete aerial fit + all other required fittings. You can model a later MC-130E by using our Long Engines in conjunction with this set


MC-130H Combat Talon II Conversion Set				Ł22.90
This fascinating set converts the Italeri kits to this low-level special operations variant of the Hercules. The set includes APQ-170 radar nose with retractable FLIR, Long Engines, and all other external lumps and bumps, together with replacement cockpit panels.
Top of Page
For the Airfix 1/72nd Scale E.3 Sentry

no less than Eight Flightpath Detail and Conversion sets that each use this kit as a basis.
Boeing 707 Intercontinental Airliner Set (Our first Airliner Set)				Ł12.90
This contains airframe, undercarriage & engine details - plus etched passenger window and door inlays, together with inner door details - [Can also be used with Heller Boeing 707 Airliner kit]

RAF/Armee de L’Aire E.3D/F Sentry Detail Set				Ł12.90
For the kit as supplied - contains radome overlays & details, aerial fit, airframe & undercarriage details, and engine turbine blades and other parts.

USAF/NATO E.3 Sentry Detail & Conversion Set				Ł24.90
As for above set, but supplied with a fully detailed set of four resin & etched TF.33 Engines.

US Navy E.6A Mercury Conversion Set				Ł19.90
Full detail set, with resin wing tip pods, plus towed array gear and full aerial & antennae fit, together with etched turbine blades, and many other details. The Mercury is the US Navy's replacement for the C.130 in the role of maintaining links with missile launching submarines, and designed [with multiple re-fuellings], to perform missions of up to 72 hours.

USAF E.8C Joint STARS Conversion Set				Ł19.90
Full detail set, with resin canoe fairing, plus large and comprehensive aerial & antennae fit - supplied with window-cutting templates and other airframe and undercarriage fittings, to enable you to model a service-entry version of this battlefield surveillance aircraft.


USAF EC-18 ARIA Conversion Set				Ł22.90
Full detail set with the large resin nose radome, fuselage radome, HF probes, full antennae & aerial fit, together with window panel inlays for fuselage sides and many other fittings to model this fascinating aircraft used for calibration of test-range instrumentation.

TF-33 Engine Set				Ł19.90
This set provides four super detailed TF-33s as supplied in our NATO/USAF E3 Detail Set.

CFM-56 Engine Set				Ł32.90
A replacement set of resin units for the ones in the Airfix kit. In addition to more detail, these units have the correct depth pylons so that the nacelles hang from your model at the correct height distance above the ground! There are two large resin units to each of the four engines. Limited Quantity, Now Available Again

Boeing J.57 Engine Cowling Set				Ł5.90
Four superbly cast replacements for your Boeing 135 Series models that have J57 engines.
Top of Page

US Navy Carrier Deck Diorama Set				Ł12.90
This set provides 2 Tow-Bars, 4 Wheel Chock units, up to 14 Tie-Down Chain assemblies, and 44 Deck Tie-Down Points [each with two styles of grating], together with Carrier Deck Edging Panels. In addition - a painting template is included for applying the characteristic yellow & red broken lines to our Carrier Deck Sections [see below]. This super-value set is in cast metal and photo-etched nickel silver.

US Navy Carrier Deck Section				Ł10.90
This pack contains approx 215 x 140mm of deck section with fold down side walls making a neat display base. All the correctly spaced location holes are included for 22 aircraft tie down points and are matched to the cast tie-down points provided in our USN Deck Set [above], which will fit out two of these deck section units. These cast tie down points, when fitted, provide full under-floor support for this base unit throughout its entire area. In addition - slots are provided in the base for the deck edging panels that are provided in our new USN Deck Set.


Air Show Display Set				Ł10.90
This set includes some useful items for displaying your aircraft in an air show setting as opposed to an operational base situation. It includes two Travel Pods with two nose variants [items frequently seen on visiting aircraft for carriage of the crew's personal affects], two pairs of Display Aircraft Smoke Pods, eight Crowd Barrier Units and RBF Tags and Pins for two aircraft - a bargain set.

Fast Jet Cockpit Fittings				**
This generic set is a must for all 1/72nd fast jet modellers. It provides you with generous quantities of all of the following items - instrument bezels & MFD screens, a selection of HUD frames, canopy latches, canopy mirrors and brackets, ejector seat handles [various styles] & harness/safety strap parts - all parts that any serious modeller would consider essential - all in beautifully etched nickel silver. Available Soon

MiG 21 Fishbed Detail Set				Ł6.90
For Fujimi kits or KP kits - contains ejector seat & cockpit details, air brakes wing fences and many other parts - also includes access ladder and wheel chocks.

Mil 24 Hind Detail Set				Ł3.90
For any MiL-24 kit - includes missile launch rails, aerials, sensors, and replacement fins for the kit missiles.

Mil 28 Havoc Detail Set				Ł3.90
For the Dragon Mil 28 kit

Boeing B.52 Stratofortress
The BUFF is an another aircraft we have been working on over some considerable time - since 1993 in fact - and in due course we will be introducing many sets for this venerable aircraft. These will be for use with both the Monogram ‘D’ and the AMT ‘H’ kits. As a ‘taster’ - here is our first release -


AGM-142 ‘Raptor’ Cruise Missile Set				Ł12.90
For the ‘H’ model - this is super-detailed set that includes three missiles in injection resin with detailing in etched nickel silver - plus a superb cast data link pod. This set comes with CAD generated colour coded assembly instructions and many photo references.
Top of Page