 |
| 1/32nd Scale |
| Our Current Range of Post-War 1/32nd Scale RAF Kits, Aircraft Detail Sets and Ground Support Equipment |
| SiteMap |
|
| 1/32nd Scale |
| Our Current Range of Post-War 1/32nd Scale RAF Kits, Aircraft Detail Sets and Ground Support Equipment |
| SiteMap |
 |
||||||
| RAF Bloodhound Mk.2 SAM Missile and Launcher. The Dog Still Barks! | £79.90 | |||||
| A very impressive and much praised model - over 8" high, in injection-moulded resin, cast metal and photo-etched brass. This kit provides for an ultra-detailed model of both missile and launcher, with all surface detail on the missile being fully and accurately reproduced. Also included is a beautifully sculpted figure of an RAF Policeman - Limited Supply Only! (See Customer Gallery) | ||||||
Sets for the Revell Hunter kit |
||||||
| Hawker Hunter Detail Set | £27.90 | |||||
| Large etched set for the Revell kit, as supplied - features cockpit details, instrument dial films, Mk.2 ejector seat parts, new wheel bay, undercarriage, air brake & wing flap detailing [including fuel tank cut-out versions], plus many other items, including some cast fittings. Includes our new colour-coded instructions - Super Value set. | ||||||
| RAF Hawker Hunter F4/F5 - Royal Navy Hunter GA.11 Detail & Conversion Set | £36.90 | |||||
| Includes all of the above items + resin conversion parts for wing leading edges & tail cone, together with earlier cockpit, jet pipe & wing flap details. | ||||||
| Echelon Hunter Decal Sheet | £5.90 | |||||
| By special arrangement - Flightpath has a limited supply of these superb
sheets for retail sale only. These sheets from the Twin Seat Echelon Hunter kit
are ideal for F4/5 & GA.11 versions - using the Flightpath RAF Hawker Hunter
F4/F5 - Royal Navy Hunter GA.11 Detail & Conversion Set - see above. They also have the correctly coloured roundels & fin flashes. |
||||||
| Sheet Contents - RAF - 1 Sqn., 4
Sqn. [both suitable for single seat use - with our Hawker Hunter Detail Set], 74 Sqn. [ideal for F4], plus Royal Navy - 738 NAS [suitable for GA.11] New Low Price ! |
||||||
| Hunter Ground Power Unit | ||||||
| We have just released a GPU for use with the Hunter - see the 32nd RAF Diorama Accessory Listing below | ||||||
| Hawker Hunter Display Set | £19.90 | |||||
| Contains Access Ladder, Tow-Bar, Gun Pack Trolley and Gun Pack - ideal for all your single-seat Hunter displays. | ||||||
| New Trumpeter Lightning Kits - | ||||||
| Dedicated Sets for the New Trumpeter Kits will be released as the kit become available | ||||||
| Echelon Lightning F2A/6 Detail & Weapons Set | £49.90 | |||||
| A very large set that includes a new cockpit tub, with accurate consoles that are supplied with laser plotted instrument dial films, ejector seat details, canopy sills and framing, and a crew access ladder. New main wheels and super-detailed hub assemblies with both early & late style wheel hubs, and a mass of undercarriage bay and door details. There are a large quantity of airframe parts included - jet pipe details, aerials, new ventral strakes, FOD guard and more. On the weapons side - we supply 2 each of resin Firestreak and Red Top missiles, with ultra fine wing and fin detail, together with two missile handling trolleys, for your Lightning display. Etched parts are in nickel silver - which has similar working characteristics to brass, but will allow you to leave finely-detailed parts like undercarriage door fascias un-painted. Limited Supply Only. |
||||||
Tornado |
||||||
 |
||||||
| RAF Tornado GR1/GR1A/GR1B/GR4/GR4A Detail and Conversion Set | £44.90 | |||||
| This large boxed set includes all that you need for a fully-detailed RAF machine - with full cockpit detail, access ladder, new undercarriage, jet pipe details, many other airframe mods, and details. The set includes Boz 107 pod details, LRMTS and FLIR units, and a Linescan pod for the GR1A/4A variant. | ||||||
| Tornado Flaps, Slats & Spoilers Set | £27.90 | |||||
| A set you can really ‘Hang Loose’ with - this set is in etched nickel silver & cast metal. Although a predominantly etched set, it is designed to eliminate most of the difficult forming, whilst giving you the scale edge thickness to the parts that are essential in parts like these and which only etched metal can provide. These units build into the most detailed versions of these parts available to the modeller. For use with any of the current Revell kits. | ||||||
| RAF Tornado Gulf War Decal Sheet | £5.90 | |||||
| Four options, "Alarm Belle", "Anola Kay", "Foxy Killer", and "Nikki-Snoopy Airways" | ||||||
 |
||||||
| New! - Tornado ‘Hindenburger’ 2250 Litre Fuel Tank Set | £16.90 | |||||
| This set provides a pair of 2250 Ltr. ‘Hindenburger’ fuel tanks supplied as vacuum moulded sides [2 per tank] in order to keep down weight, as well as cost - they would be far too heavy in resin - as well as very expensive! | ||||||
| Sky Shadow ECM Pod | ||||||
| Super Detailed unit in injection resin - For Release Early 2009 | ||||||
 |
||||||
| RAF Tornado/Eurofighter-Typhoon Boarding Ladder | £9.90 | |||||
| A superbly detailed model of the impressive boarding ladder used by some Tornado squadrons and now with Eurofighter-Typhoon. This is an etched kit with step by step instructions and uses slot and tab and recessed locations throughout the assembly, providing for the decisive and positive locating of parts, together with structural strength. | ||||||
Tornado GR1 & General RAF Weapons Sets |
||||||
| RAF 1,000lb Iron Bombs | £16.90 | |||||
| With No.117 Retarded Tail units - four super detailed units in resin, with etched fin, lug and fuse vane detail. | ||||||
 |
||||||
| RAF 1,000lb/CPU-123B Laser-Guided Bombs | £14.90 | |||||
| Two super-detailed units, with correct inner fin, and fuse vane detail, together with hollow seeker head units in cast brass. | ||||||
| GBU-24[V]2/B - Paveway III 2,000lb Laser-Guided Bombs | £16.90 | |||||
| Two super-detailed units - these are the lager LGBs now carried by Tornados. | ||||||
| RAF TIALD [Thermal Imaging and Laser Designation] Pod | £6.90 | |||||
| Super-detailed pod in resin | ||||||
  |
||||||
| New! - Storm Shadow Stand-Off Missile | £29.90 | |||||
| This set provides a pair of these large missiles - surely the ultimate load out for your 1/32nd Tornado GR4. These are carried on the outer belly racks of the Tornado. The missiles are in injection resin so there is only a small feed and a few vent ‘pips’ to sand off on each missile before assembly of the etched nickel silver fins and details can begin. | ||||||
| RAF Alarm Missiles | £10.90 | |||||
| Two units in resin, supplied with adapter shoes and launch rails - superbly detailed, with etched canards, wings and fins. | ||||||
| Sea Eagle Missiles | £14.90 | |||||
| Two units in resin, supplied with launch rails - fully detailed, with etched wings, fins and rear cover plates. | ||||||
| AIM-9L Sidewinder Missile Set | £8.90 | |||||
| Two super-detailed units in metal and photo-etched brass, with launch rails and safety caps - required in twos or fours for most later RAF aircraft types. | ||||||
For your Tornado-Eurofighter Displays - |
||||||
|
||||||
| Must Have’ kits & sets for your 1/32nd RAF Aircraft Dioramas - | ||||||
| RAF Diorama Set | £19.90 | |||||
| For displaying your modern RAF aircraft in an operational setting - this set contains two fire extinguishers, two tow-bars, 6 earlier pattern sprung wheel chocks, 6 current style rubber wheel chocks, a wire storage bin, a maintenance ladder, ‘Aircraft Armed’ signs and 12 'Remove Before Flight' tags in two different sizes. | ||||||
| RAF Maintenance Set | £14.90 | |||||
| Contains three superbly-detailed Aircraft Jacks in cast metal and etched brass, together with an RAF General Step Ladder, and an Airfield Storage Bin. | ||||||
 |
||||||
| RAF Oxygen/Nitrogen Trolley | £19.90 | |||||
| A super-detailed unit in cast metal and etched brass with alternative parts for both versions. This is an essential item for all your Tornado, Hawk, Lightning & Phantom displays. | ||||||
 |
||||||
| New! - MK.5 Starter Trolley | £14.90 | |||||
| Super-detailed kit in cast metal and etched brass with ultra-fine body detail, laser plotted control panel film and photo-references - these units were used with both Hunters and Hawks. | ||||||
 |
||||||
| RAF 25kVA Ground Power Unit | £19.90 | |||||
| This is the unit alongside virtually every Lightning and Phantom. This is a super-detailed kit in etched brass and cast metal with a pre-formed body and fittings to our usual standard. | ||||||
 |
||||||
| RAF Tornado/Eurofighter-Typhoon Ground Power Unit | £18.90 | |||||
| A super-detailed kit in etched brass and cast metal with a pre-formed body- a must for all your Tornado displays | ||||||
 |
||||||
| RAF Weapon Trolley Set | £22.90 | |||||
| Super detailed kit in cast metal and etched
brass - contains a Type S Weapons Trolley, and a Type Y Weapon Loader. The Type S Trolley
can be made as a bomb carrier using the bomb chocks included, or as a missile carrying
trolley, using the alternate parts for the air-transportable racking structure included.
These trolleys can be used with any of our Tornado weapons sets in an action-packed
diorama. The Type S Trolley can be used in the missile-carrying role with your F.4K[UK]
displays - decked out with Skyflash & AIM-9L Sidewinder missiles. The Type Y has an
additional missile carrying head, supplied in addition to the bomb carrying structure. In our opinion this is our finest kit to date! |
||||||
 |
||||||
| Airfield Hazard Fencing + Wind Sock Set | £18.90 | |||||
| This super new multi-media set provides 498mm of this fencing - constructed from basswood strip and etched brass. This is supplied with a post spacing template for locating the posts into your diorama base. In addition, two large hard standing drainage covers are included together with a super-detailed Wind Sock kit - constructed from brass tube and etchings with material and templates for the sock & and for the liner - all this for only | ||||||
| Four Bay Portakabin | £29.90 | |||||
| 1970/80s plywood cabin of a style supplied in some quantity to the UK military by a South Wales company. These have now been superseded by the modern plastic coated metal buildings. The kit is supplied with four building support assemblies, steps and a gas supply cylinder & cage. | ||||||
| Also Available | ||||||
 |
||||||
| PSP Airfield Planking | £12.90 | |||||
| Contains 28 clip-together etched sections - enough to display a WW2 fighter aircraft | ||||||
| For Future Release - | ||||||
 |
||||||
| Two super detailed kits for
the BAe Hawk in 1/32nd Scale Kit 1 - BAe Hawk T.1 + T.1A [Red Arrows Version] Kit 2 - BAe Hawk T.1A These kits will be manufactured and sold on a similar basis as our 1/48th Firefly kits. They will be in low pressure injection resin and cast and etched metal, with laser-plotted instrument panel films and multi-choice decal sheets, that include full stencil markings [as applicable]. The comprehensive instructions feature our colour-coded by material assembly drawings, with full explanatory text and a large amount of close up colour photo references of Hawks. The kits will also include a highly-detailed access ladder. Further details will be given about these kits nearer to their release. Please note - we have no firm date or pricing details yet - they will be expensive but low in cost in relation to what you get in the box! |
||||||
Top of Page |
||||||
