Firingline Logo
Firing Line Figures
Sitemap
Our Current Range of 120mm & 90mm British & Allied Forces Figure kits. These are resin figures with cast weapons and detailing - most are supplied with etched insignia and a title plaque, plus a scenic base

Firing Line figures are in resin. Weapons and some smaller parts are cast for strength, while in most kits, fine additional detailing is in photo-etched metal. Any removal of resin items from moulding blocks is kept to a minimum. All figure sets are supplied with painting notes and instructions as required. Some figures are supplied with a colour photograph for assistance in painting and assembly.

Why Choose British Army Figure Subjects?
Because there is a rich history of subjects, with some British Army regiments being able to trace their lineage back over 300 years.

Because of the sheer variety of uniforms that this long history has produced, added to by the requirement, for much of this time, for British soldiers to serve in so many regions of the world. Because the insignia worn by British soldiers is so complex - It is a vast and rewarding subject for study, and will lead you to undertake many interesting conversions from the figure kits that Firing Line, and other manufacturers, offer. Because British Forces figures stand out in a display - this is due to the imbalance of figure subjects currently on offer, and displayed in competitions. Firing Line is seeking to help rectify this imbalance - there will be no nazi war criminal, ‘Vlad The Impailer’, or ‘Pin Head’ figures from us!

If you have a serious interest in British Army subjects - there can be no better magazine to collect than ‘Regiment’. This is published by Nexus, and each issue covers a regiment through its campaign history, uniforms, insignia etc. You can use these magazines in conjunction with several of our figures to produce many interesting conversion subjects.

Register your interest with us - if you want to be kept on our mailing list for the future releases in our British & Allied Forces Series - let us know - giving us either your postal and/or E-mail address.
Special - Few Only - 120mm The Red Baron - Manfred von Richthofen  Price £22.90
Cast in high grade metal.

WW I - WW II - Post WWII

Pre WW I Figures
Officer 74th Highlanders, Cape Wars 1851
120mm - Officer - 74th Highlanders - Cape Wars, 1851. Limited Supply £22.90
120mm - Soldier - Zulu War, 1879 [Isandlwana & Rorke's Drift] For Later Release **
Can be made as a rifleman, bugler or Quartermaster Sergeant.
Officer - 91st Highlanders, Zulu War, 1879
New -120mm - Officer - 91st Highlanders, Zulu War, 1879.  £29.90 
Standing figure with revolver and sword. Ammunition box in illustration is included. 
120mm - Soldier, 1st Welsh Regt., South African [Boer] War, 1899 For Later Release **
New - 120mm - Signaller, 1st Highland Light Infantry, India, 1907. £36.90
This figure depicts a qualified heliograph mirror signaller as serving with the HLI in India in the early years of this century. The kit is supplied at a bargain all-in price that includes our Visual Signalling Equipment Set {normally this set alone is £14.90} with alternate parts to construct either a mirror or signalling lamp unit, together with a telescope and case and much more. Finely-etched insignia detail is a feature of this fascinating kit.
WW I Figures

The Great War
Probably no other area of the figure hobby offers as much scope for intricate diorama modelling as World War One. It is ironic that something so horrific as trench warfare can offer such possibilities for portraying very moving and intense scenes. Firing Line offers you by far the largest range of WW1 subjects in 120mm. Where applicable, each figure kit comes with a super detailed weapon or equipment, an insignia set with rank, skill badges, wound stripes and good conduct chevrons etc., together with a battle-patch painting template to assist you in applying any of the endless combinations of colour patches worn by soldiers fighting on the Western Front in the later period of the war.

With several beautiful vignettes also available, plus our highly-praised 1/15th Scale British Army WW1 Tank at over 650mm long, you can now build an incomparable series of chronologically-ordered WW1 models and displays.
Dear Prudence- A Letter from the Front.
120mm - "A letter From The Front"  £42.90
A British Officer is writing home - an atmospheric set of a British officer {with full photo-etched regalia} writing home on the eve of the Battle of The Somme. The figure is seated at a table, surrounded by a gramophone and records, a lantern, and a framed picture of his wife. The set includes printed reproductions of both the picture, and the letter he is writing. In addition his coat, gas equipment case and a helmet are provided as parts to hang on any dug-out wall you choose to construct as part of your display for this set, as is a shelf unit with books.   Please Note - some of the props in this photo are different to those now supplied and other items [not shown] are now included.
British Infantryman - Sitting - 1915-17
120mm - British Infantryman [Sitting Pose]- C.1915-17.  £29.90
1915-17 -wearing steel Brodie helmet. Supplied with SMLE rifle and insignia set - no base. 
120mm - British Infantryman [Sitting Pose, wearing greatcoat] - C.1915-17. £29.90

Wearing Greatcoat, 1915-17 - supplied with SMLE rifle and insignia set - no base.

 
120mm - British Infantryman/Machine Gunner - C.1916-18. 
Infantryman/Machine Gunner - 1916-8 - wearing leather jerkin - steel Brodie helmet. Base Not Included. 
The figure includes a full insignia set. 
Can be supplied in two formats -
a. with Lewis Gun and ammunition box with spare magazines and oil can - Price £36.90.
or
b. with a superbly detailed Vickers Machine Gun Kit, with tripod mount, coolant can, ammunition belt and boxes - Price £47.90.

120mm - Private, Stretcher Bearer, 2Bn. Seaforth Highlanders, 4th Div, 1916

 £34.90
Standing pose with rolled up stretcher. Note that the stretcher kit can also be made up in the "in use" configuration. Figure includes all insignia.
ANZAC Infantryman, Gallipoli Campaign 1915
120mm - ANZAC Infantryman, Gallipoli Campaign, 1915.  £25.90
'Goodbye Blue Sky' Vignette
120mm - 'Goodbye Blue Sky' Vignette £39.90
Featuring a Royal Flying Corps Officer with a German shepherd dog at the stone memorial to a fellow flyer, killed in action.
 Currently on offer @ £29.90
120mm - 'Remembrance' Vignette  £49.90

Three Figure Set - the final piece in our WW1 jigsaw, this original vignette portrays a 1914-18 war memorial, with a statue of a British Infantryman atop the memorial. The statue is a variant of our WW1 90mm figure. The structure carries many finely-etched memorial plaques, whilst, paying their respects at the scene, are a small boy, who carries a bouquet of poppies accompanied by his mother.
90mm - British Infantryman, 1918 £19.90
This is the beautifully detailed figure that is the 'statue' in our 120mm 'Remembrance' Set [above] - figure is supplied with SMLE rifle, shovel & etched insignia set.
120mm  World War One Heads Set £19.90
Contains five resin heads and additional helmets with chin-straps. Four of the heads feature differing patterns of steel helmets, whilst the fifth head wears a service dress cap. This set is ideal for conversion enthusiasts, using our own or other manufacturers figures.

Top of Page
Accessories for 120mm Figure Vignettes and Dioramas
English Public House/Tavern Frontage.English Public House/Tavern Frontage.English Public House/Tavern Frontage.
New! - English Public House/Tavern Frontage £36.90
This kit contains three large etched sheets that give you all the door, window and pub sign parts to construct the frontage of such a building, using the templates included and a suitable thickness plastikard. Also included is all the wood required for the beams and timbers for the pub frontage + cutting guides. In addition this super-value kit includes a choice of three pre-printed pub signs and castings for all the hinge and door latch bolt heads. Ideal for displays from the 17th Century onwards.
120mm Resin Sandbag Wall Section £12.90

Highly Detailed section of resin-moulded sandbag wall section supplied with assorted strip-wood and full instructions to construct a superb section of WW1 trench section, ideal for the display of any British or German WW1 Figures - Bargain Pack Price.
120mm - Barbed Wire £6.90
Over 3,000mm - plus cast wire cutters
120mm Word War One Diorama Accessories £14.90
This super-detailed new set in cast metal, etched nickel silver and wood includes tools such as shovel, pick-axe, oil cans and wire cutters, together with drinking mugs and bottles, mess tins, knives, forks and spoons etc. A must for all your WW1 figure displays.
British Army Stretcher £8.90
A complete kit in cast metal, etched brass and material. It can be made in either an "in use" or a rolled up configuration. The design of this item changed little between WW1 and the 1960s.
New! - PSP Planking  £8.90 
This set contains two lengths of this widely-used product in etched brass, useful in dioramas from WWII to The first Gulf War, where lengths were carried by many non-tracked vehicles as sand ramps. The planks were usually laid in a stepped fashion [as in brickwork], and half-plank lengths were manufactured for the purpose of evening-up the edges of areas laid with PSP. On the centre underside of each plank there are half-etched lines that you can use as guides to cut planks into half-lengths for this purpose. The units fit together as per the real thing. 
British Army "Soldier 95" Rucksack & Side Pockets £8.90
This resin set includes a complete rucksack with side pockets attached plus two separate side pockets - these are can be removed from the full rucksack in real life to be worn as a single pack. Thus, this set can be used on up to three separate modern figures.
Top of Page

WW II
120mm - Sergeant Major, 2nd Seaforths, 51st Div. North Africa, 1942. For Later Release **
With grenade rifle.
120mm Bren Gunner, WW2 - For Later Release **
Anti-Aircraft Gunner, Royal Navy Coastal Forces, 1942
120mm - Anti-Aircraft Gunner, Royal Navy Coastal Forces, 1942. For Later Release **
With twin .303 Lewis gun kit. 
British Infantryman, Allied Invasion Force, N.W. Europe, 1944
120mm - British Infantryman, Allied Invasion Force, N.W. Europe, 1944. For Later Release **

Top of Page
Post WW II
Soldier, Northern Ireland, 1970s [Internal Security Dress]
120mm- Soldier, Northern Ireland, 1970s [Internal Security Dress]  £29.90
A superb figure with a choice of three heads, and an SLR rifle.
120mm - Paratrooper, Northern Ireland, 1970s £29.90
This figure compliments the previous one and is supplied with a super-detailed SLR rifle.
Northern Ireland Streetscene £14.90
1970s - this easy to assemble kit provides a fully detailed pavement and walling, a sign & post, a drain cover and an anti-riot shield and is large enough to accommodate either or both of our Northern Ireland figures.
Paratrooper Operation Corporate, Falkland Islands 1982.
120mm - Paratrooper, Operation Corporate, Falkland Islands, 1982.  £39.90
British Infantryman, Operation Granby/Desert Storm, 1991
120mm - British Infantryman, Operation Granby/Desert Storm, 1991.  £29.90
120mm - Officer Tornado Aircrew, Royal Air Force, Early 1990's - **

A superbly detailed figure, that includes all of the intricate life jacket and 'G' suit detail - sharply reproduced. The figure is supplied with finely-etched nickel silver details for zips etc. and a cast PE connector unit. Includes a very stylish title plaque.
120mm - British Soldier, 1990s  {Kneeling Pose} £29.90
120mm - British Soldier, 1990s  {Walking Pose} £29.90

These are figures with fine uniform and equipment detail, supplied with a choice of heads, one with current combat helmet, and one with a beret. An SA.80 Individual Weapon is included. A finely-etched sheet is supplied with bayonet parts, straps, helmet scrim, and in case you wish to complete the figures as serving under the UN in Bosnia, brassards are supplied for the Royal Anglian Regt. and for the Devon & Dorset Regt. A base unit is supplied, together with a rucksack and additional detached side pouches.

 1 only of each left

Top of Page

Connect to Frames | Site Map | ©opyright Information