Please E-Mail Inquiries To alan.baxter@clara.co.uk
| Original Equipment Brass Spade Electrical Connectors | |||
| 20 Original Equipment Spade Connectors Ten small wire-size connectors (low-current - sidelights, relay triggers etc.) Ten large wire-size connectors (high current - headlamps, window wipers etc.) |
£4-50 UKP |  |
|
| Stainless Steel Fitting Kits And Fasteners | |||
| Wing Fitting Kit Ten 13mm headed bolts Ten flat penny washers |
£4-50 UKP |  |
|
| 4 Wing Fitting Kits 4 wing kits to fit all of the wings to your car |
£15-00 UKP |  |
|
| Sloping Headlamp Kit Two headlamp to body securing screws Four adjuster screws |
£3-50 UKP |  |
|
| Indicator kit Two indicator top to body securing screws Four nuts with washers for bolting indicators to the wings |
£2-50 UKP | ||
| Running Board Fitting Kit 6 bolts and washers to attach boards to sills 4 running board to wing through-bolts with nuts and washers |
£4-99 UKP |  |
|
| Door Hinge Fitting Kit 12 countersunk bolts (fits both sets of door hinges) Can be used for any air-cooled VW door hinges (including T2 doors and drop sides for crew-cabs) |
£5-50 UKP |  |
 |
| Door Lock, Handle & Striker Plate Fitting Kit 8 Countersunk bolts plus 2 regular hex bolts to fit your inner pull-handle 8 Countersunk bolts to bolt the striker plates to your door posts. Fits inner and outer door handles to your doors and the striker plates to the door posts. |
£5-99 UKP |  |
 |
| Europa Bumper Irons Fitting Kit Six securing bolts with flat washers |
£3-50 UKP |  |
|
| Blade Bumper Irons Fitting Kit Four securing bolts flat washers |
£2-50 UKP |  |
|
| Rear Swing Axle Suspension Torsion Bar Cover Plate Fitting Kit Eight bolts with spring washers |
£6-50 UKP |  |
|
| Floor Pan Bolt, Washer & Nut Set 22 Chassis Washers Designed By Baxter Aerospace & Automotive Solutions For VolksBolts 22 Chassis Bolts (Shorter then stock to save weight but still long enough to fit) 4 Long Bolts For Fitment At Front Of Pan (Underneath) To Body 2 Short Bolts To Fit Body To Front Beam (Under Petrol Tank) Of The same thickness and same basic pattern to VW original washers - but with an M8 hole.! Shoulder of bolt fits better, reducing stress concentrations. A superior product to standard. If your body does not match snuggly to the chassis then some file-fitting may be required - this is unlikely though. Dropped straight onto all stations on my 1500 bug with no file fitting and no hassles - looks great - works great. |
£49-95 UKP |  |
  |
| Engine Lid Fitting Kit 3 screws with washers for the lock 10 bolts with washers for the hinge attach and hinge mounts |
£4-00 UKP |  |
 |
| Bonnet Fitting Kit 2 bolts with washers for the plunger & latch 4 bolts with washers for the hinge attach |
£3-50 UKP |  |
|
| Tinware Screws Bag of 20 tinware screws with washers |
£4-99 UKP |  |
|
| 1600cc (Doghouse Oil Coller) Full Tinware Screw Nut And Bolt Set kit can also be used for 12/13/1500cc engines |
£15-00 UKP | 
| |
| Engine Ancilliary Fitting Kit Bolts, nuts and washers to fit ancilliaries to your engine (see photograph for full layout of kit) |
£4-99 UKP |  |
|
| Exhaust Fitting Kit Bolts, nuts and washers to fit the exhaust to your engine (see photograph for full layout of kit) (non-stock systems can be catered for) |
£6-50 UKP |  |
|
| M8 Domed Nuts Dress off exposed stud ends and help keep threads clean and free from dirt |
£0-40 UKP each |  |
|
| M6 Domed Nuts Dress off exposed stud ends and help keep threads clean and free from dirt |
£0-25 UKP each |  |
|
Please E-Mail Inquiries To alan.baxter@clara.co.uk